Community

Community

Vacuums
Purifier Fan
Hair Care
Hand Dryers
Support

Find us

Facebook

Twitter

Youtube

Change Location

Philippines (English) ‎

See more locations

Search

Community

Products
Shopping info
Support
- Get expert help
- Register your warranty
Community
General

^*Up to 99.95% particles based on technical tests. Virus testing conducted on H1N1 by third party lab, Feb 2020.

³⁷Applies in Eco mode when using a non-motorized tool.

⁴⁷Suction tested to IEC 62885-2 CLs 5.8 and 5.9, at the cleaner head, compared to Dyson Cyclone V10™ vacuum, tested in Boost mode. Based on external and internal tests, actual performance may vary under specific conditions. ‘Intelligence’ is defined as Dynamic Load Sensor and LCD screen technology.

⁴⁸Tested at the cleaner head to ATSM F558.

⁴⁹Applies in Eco mode on hard floors.

⁵⁰Additional battery and charger available to buy separately.

⁵¹vs untreated hair.

⁵²Lightweight defined as below 2kg by Dyson. Suction tested to IEC 62885-2 CL5.8 and CL5.9, loaded to bin full, in Boost mode internally at Dyson and at independent third-party laboratories. Weight compared to V11 (includes main body, wand and fluffy cleaner head).

⁵³Suction tested to IEC 62885-2 CL5.8 and CL5.9, loaded to bin full, in Boost mode internally at Dyson and at independent third-party laboratories.

⁵⁴Compared to V11 at the fluffy head.

⁵⁵Up to 40 minutes in Eco mode. Up to 5 minutes in Boost mode. Run time may vary depending on usage and floor type.

⁵⁶Based on third party test (Airmid (Ireland) in 28.5m3 area. Tested on Influenza A (H1N1) only.

⁵⁷Third party full machine testing based on GB/T 18801-2015 formaldehyde cumulative clean mass testing with continuous injection until plateau of formaldehyde CADR is achieved. Results may vary in practice.

⁵⁸Tested for filtration efficiency at 0.1 microns (EN1822, ISO29463)

⁵⁹ In maximum setting. Tested for air projection, purification coverage in a 81m3 room.

⁶⁰Particle challenge by DEHS oil specified in EN1822 within a chamber specified in ASTM F3150. Tested in Max Mode at IBR US, for whole machine efficiency above 99.95%.

⁶¹Gas capture rates may vary.

⁶² Refer to the Dyson Link app for compatible voice services.

⁶³Filtration tested against ASTM F1977-04, tested in MAX mode by independent third-party laboratories under the required test conditions. A standard test method determining the initial filtration efficiency of a vacuum cleaner system. The filtration efficiency of six particlates of non-continuous diameter is measured by the entire vacuum cleaner system (0.3 micron, 0.5 micron, 0.7 micron, 1.0 micron, 2.0 micron, and 3.0 micron or more), the vacuum cleaner system is placed in a fixed state throughout the test procedure, by counting the numbers of upstream particles and downstream particles for analysis and obtaining results. Test environment: air temperature (21.1˚ C ± 2.8˚ C) and humidity range 35% - 55%.

⁶⁴Suction tested to IEC 62885-2 CL5.8 and CL5.9, loaded to bin full, in MAX mode, internally at Dyson and at independent third-party laboratories.

⁶⁵Centrifugal force analysis was conducted in Dyson lab in 2020.

⁶⁶Motor speed analysis was conducted in Dyson lab in 2020. May vary depending on actual usage.

⁶⁷Compared to Dyson V11™ vacuums.

⁶⁸Based on internal testing at Dyson in 2020. May vary depending on actual usage.

⁶⁹Tight spaces refer to gaps that are wider than 20.7cm.

⁷⁰Pick-up tested to IEC 62885-2 Cl5.4 in MAX mode internally at Dyson in 2020. May vary depending on actual usage.

⁷¹Dyson Micro 1.5kg™ features are floor, mattress and handheld cleaning.

⁷²Applies in Eco mode when using a non-motorised tool. Up to 18 minute runtime in Eco mode for full product with motorised tool. Run time may vary depending on usage and floor type.